Download the Software For Printing On a Prusa Mendel (Video 21)

Recap: After building a Prusa Mendel 3-D printer from kit I purchased from nwreprap.com,  I'm in the process of downloading the necessary software.

I followed the instructions in Video 21 to set up the software.  I'm using an older PC running Windows XP.

Download the compressed archives and extract them.

• Arduino IDE from http://arduino.cc/en/Main/Software
• Sprinter Firmware from https://github.com/kliment/Sprinter
• Pronterface from https://github.com/kliment/Printrun - scroll down and click on the link to download one of the pre-compiled versions from http://koti.kapsi.fi/~kliment/printrun/
• Slic3r from http://slic3r.org/download
• .stl file for test and calibration and first print which is a 20 mm cube - http://www.thingiverse.com/thing:34553

Extract all software to your desktop.